Jun 4th, 2009, 2:38 pm
So stick with the May 12 version. It's working fine for me too.
Jun 4th, 2009, 2:38 pm

Huawei P9 Lite
AOKP 7.1.2 for hi6250 based on Nougat blobs (EMUI5.X)
Jun 4th, 2009, 2:58 pm
Milos Garmin wrote:
kribe wrote:
Milos Garmin wrote:Hi there,

I tried to use skin DJ.Amigo v2.1.1 (http://www.gurjon.com/download/index.php?dir=AMIGO/) added it on my Storage card into folder amigo and runed the utility.exe. But after run Amigo no changes are shown. Does anybody nows how is it possible to apply this skin?

Thanks a lot

MG


From menu/settings select Day- and Night scheme. Exit Amigo and restart.


Hi Thanks,

for answer.

But I tried it and no changes are show.

Thx

MG


There's a file called settings.txt that was included with version 1.5.1 (and maybe earlier versions). You have to merge the contents of the settings.txt with your sys.txt. The settings.txt file contains comments for most lines but some are not intuitively obvious so you'll have to play with the settings.
Jun 4th, 2009, 2:58 pm
Jun 4th, 2009, 3:44 pm
Milos Garmin wrote:Hi there,

I tried to use skin DJ.Amigo v2.1.1 (http://www.gurjon.com/download/index.php?dir=AMIGO/) added it on my Storage card into folder amigo and runed the utility.exe. But after run Amigo no changes are shown. Does anybody nows how is it possible to apply this skin?

Thanks a lot

MG


First you should put DJ skin files into amigo\content\skin folder. Then you should be able to choose it from Amigo. And you need to exit and start Amigo again to have new skin applied. If you need utility.exe which purpose is to delete or move speedcam files you should put in sys.txt appropriate settings. I can't find it right now but I will if you insist.
Jun 4th, 2009, 3:44 pm
Jun 4th, 2009, 3:49 pm
jj64 wrote:So stick with the May 12 version. It's working fine for me too.


May 12 version???? You mean March 12, don't you?
Jun 4th, 2009, 3:49 pm

HTC Touch HD - WM_v6.1 Pro / HP iPaq 214 - WM_v6.0 Std
Jun 4th, 2009, 5:14 pm
mikeai wrote:
Milos Garmin wrote:Hi there,

I tried to use skin DJ.Amigo v2.1.1 (http://www.gurjon.com/download/index.php?dir=AMIGO/) added it on my Storage card into folder amigo and runed the utility.exe. But after run Amigo no changes are shown. Does anybody nows how is it possible to apply this skin?

Thanks a lot

MG


First you should put DJ skin files into amigo\content\skin folder. Then you should be able to choose it from Amigo. And you need to exit and start Amigo again to have new skin applied. If you need utility.exe which purpose is to delete or move speedcam files you should put in sys.txt appropriate settings. I can't find it right now but I will if you insist.


Thanks a lot! Works perfectli, thx. MG
Jun 4th, 2009, 5:14 pm
Jun 4th, 2009, 6:22 pm
Replace your sys.txt with the following for skin DJ.Amigo v2.1.1

;================= dj settings start ===============
[utility]
utilitymov=",1,\SD-MMCard\Program Files\Amigo,"
utilitydel=",2,\SD-MMCard\Program Files\Amigo,"

[dj_settings]

dj_start_state=1 ;(0-2) (default 0) selection start-window 0-menu / 1-map / 2-automatic
dj_show_second_turn=2 ;(0-1) (default 0) 0 - standard second turn / 1 - always show second turn / 2 - off second turn

dj_power_change_beep=1 ;(0-1) (default 0) beep when change power input.
dj_power_change_snd="!powerswitch" ;("sound file name") (default "!powerswitch")
dj_auto_exit_mode=2 ;(0-2) (default 0) auto exit or shutdown when route complete 0-OFF / 1-sleep device / 2-exit amigo
dj_auto_exit_time=20 ;(5-200) (default 20) time (seconds) when auto exit or shutdown
dj_auto_exit_snd="!powerswitch" ;("sound file name") (default "!powerswitch") auto exit or shutdown - beep

dj_show_current_speed=1 ;(0-1) (default 0) current speed
dj_show_speed_limit=1 ;(0-1) (default 0) sign speed-limit
dj_overspeed_beep_on=1 ;(0-1) (default 0) beep over speed
dj_overspeed_beep_mod=0 ;(0-1) (default 0) 0- (1 beep) / 1- (always beep) / 1 < ... (count beeps)
dj_overspeed_beep_off=1 ;(0-1) (default 0) beep, back in normal speed 0-off / 1-on
dj_overspeed_beep_snd="!ovspon" ;("sound file name") (default "!ovspon")
dj_overspeed_beep_off_snd="!ovspoff" ;("sound file name") (default "!ovspoff")
dj_overspeed_sign_blink=1 ;(0-1) (default 0) 0 - off / 1 - on

dj_show_comapass=1 ;(0-1) (default 0) compass on map
dj_show_xenon_comapass=1 ;(0-1) (default 0) Show big Xeno compass on map
dj_show_comapass_destination=1 ;(0-1) (default 0) compass arrow indicate finish
dj_hide_hand_on_map=1 ;(0-1) (default 0) remove hand from map / please press compass

dj_gps_satellites_in_view=1 ;(0-1) (default 0) indicate digital GPS signal
dj_show_hause_number=1 ;(0-1) (default 0) house number
dj_show_info_bar=1 ;(0-1) (default 0) information bar
dj_show_current_position=1 ;(0-1) (default 0) show current position / current street
dj_cursor_menu=1 ;(0-1) (default 0) cursor menu on map
dj_bloackroad_on=1 ;(0-1) (default 0) activate button "Block Road"

dj_long_press_menu=1 ;(0-2) (default 0) long press menu button 0-OFF / 1-Exit / 2-Minimize

dj_change_butt1=1 ;(0-1) (default 0) change button, "current speed" -> "Altitude"
dj_change_butt2=1 ;(0-1) (default 0) change button, "Speed limit" -> "Current position"
dj_change_butt3=1 ;(0-1) (default 0) change button, "gps time" -> "Status GPS/Battery"

dj_curr_pos_trans=22 ;(0-32) (default 22) transparent button "current position"
dj_menu_but_trans=22 ;(0-32) (default 32) transparent button "menu"
dj_info_but_trans=22 ;(0-32) (default 32) transparent buttons "info"
dj_dir_bar_trans=22 ;(0-32) (default 32) transparent button top bar and directions
dj_cursor_menu_trans=28 ;(0-32) (default 32) transparent buttons "cursor meniu"

dj_change_sp_limit_on=1 ;(0-1) (default 0) changed speed limit on map 0-off / 1-on
dj_change_sp_limit_snd="!spchange" ;("sound file name") (default "!spchange") changed speed limit on map

dj_show_route_indicator=1 ;(0-1) (default 0) show route distance indicator 0-hide / 1-show
dj_dest_select_all=0 ;(0-1) (default 0) select all information buttons, when press one button 0-separately / 1-all

dj_speedcam_lang=0 ;(default 0) (Language Rusian RU_M1) / (0 - beep signal).
dj_speedcam_snd_mod=1 ;(0-1) (default 0) 0-separately / 1- one signal, on all camera type (working only "dj_speedcam_lang=0").
dj_speedcam_on_snd="!spcamon" ; !sectionstartB ;("sound file name") (default "!spcamon") working only "dj_speedcam_lang=0" and "dj_speedcam_snd_mod=1".
dj_speedcam_use_voice=1 ;(0-1) (default 1) sound off/on.
dj_speedcam_voice_type=1 ;(0-1) (default 1) sound files type 1 - iGO6 / 0 - ultra
dj_speedcam_pause=10 ;(0-99) (default 10) delay of seconds (dead zone)
dj_speedcam_by_overspeed=1 ;(0-1) (default 1) by overspeed
dj_speedcam_sp_blink=1 ;(0-1) (default 0) blink speed limit sign, when overspeed.
dj_speedcam_by_approach=0 ;(0-1) (default 0) by approach
dj_speedcam_repeat_distance=100 ;(0-999) (default 9999 - off) - repeat distance
dj_speedcam_delta_overspeed=0 ;(0-99) (default 0) speedcam delta overspeed (km/h)
dj_speedcam_sound_overspeed="!spcamovs" ;("sound file name") (default "!spcamovs") overspeed beep
dj_speedcam_off_snd="!spcamoff" ;("sound file name") (default "!spcamoff") speedcam hide beep

dj_speedcam_cam0=0 ; - reaction of 1 type speedcam (0 - sound and show, 1 - only show, 2 - off)
dj_speedcam_cam1=0 ; - reaction of 2 type speedcam (0 - sound and show, 1 - only show, 2 - off)
dj_speedcam_cam2=0 ; - reaction of 3 type speedcam (0 - sound and show, 1 - only show, 2 - off)
dj_speedcam_cam3=0 ; - reaction of 4 type speedcam (0 - sound and show, 1 - only show, 2 - off)
dj_speedcam_cam4=0 ; - reaction of 5 type speedcam (0 - sound and show, 1 - only show, 2 - off)

;================= dj settings end ===============
Jun 4th, 2009, 6:22 pm
Jun 4th, 2009, 9:23 pm
X10D wrote:Replace your sys.txt with the following for skin DJ.Amigo v2.1.1

;================= dj settings start ===============
[utility]
utilitymov=",1,\SD-MMCard\Program Files\Amigo,"
utilitydel=",2,\SD-MMCard\Program Files\Amigo,"
;================= dj settings end ===============


No no no. Since 2.0 version of skin only utility needs to be placed in sys.txt. All other settings could be set via menu inside of Amigo application and therefor values from sys.txt are not needed. I think they have not effect on DJ skin at all anymore.
Jun 4th, 2009, 9:23 pm
Jun 4th, 2009, 9:47 pm
where can i get the license for usa and south america?

thanks
Jun 4th, 2009, 9:47 pm
Jun 5th, 2009, 1:59 am
tilt4life wrote:The May 12 version works fine for me. But the April 8 version keeps telling me that my screen resolution isn't supported even though it is QVGA. Very weird. Anyone else experience this?


Have you tried the multinewv5.1 data.gro posted a page or two back? I had the same resolution fault, but once I put the new data.gro in replacing the one that came with the amigo apr8_09 download, it worked.

So I am using April 8 2009 version of Amigo now.

:D
Jun 5th, 2009, 1:59 am
Jun 5th, 2009, 2:29 am
mikeai wrote:
No no no. Since 2.0 version of skin only utility needs to be placed in sys.txt. All other settings could be set via menu inside of Amigo application and therefor values from sys.txt are not needed. I think they have not effect on DJ skin at all anymore.


Thanks! Now I know why making changes to the sys.txt weren't making any difference.
Jun 5th, 2009, 2:29 am
Jun 5th, 2009, 10:15 am
bb2005, where did you get this image from? It looks like someone has figured out how to "enable" the embedded media player....


bb2005 wrote:Hi!
how we can to use this?

Image
Jun 5th, 2009, 10:15 am
Jun 5th, 2009, 10:57 am
rotanon wrote:bb2005, where did you get this image from? It looks like someone has figured out how to "enable" the embedded media player....


bb2005 wrote:Hi!
how we can to use this?

Image


All pictures (for this player) and *.ui files are present in data.gro but is not runing. Maybe we can write somesing in sys.txt?
skins for this player (pink, orange, green and blue) the name for this pictures (in data.gro): e_spr_MMM_bg_pink.bmp and .....

p.s. To all (with 240_400) in this post viewtopic.php?f=255&t=63511&st=0&sk=t&sd=a&start=2100# I upload data for 240_400 (it have one problem - key "done" is not active) I am repaired it and this is a new (repaired data) http://www.easy-share.com/1905547562/data240_400.rar

In data.gro present "alternative" bar (in menu cars rum)
Image
if you like it - you must get this files http://www.easy-share.com/1905547734/Settings.rar (for resolutions 320_240, 400_240, 416_234, 480_234, 480_272) and put it in your data.gro (the way is for example 320_240: ui_igo_easy/320_240/ui)
Jun 5th, 2009, 10:57 am
Jun 5th, 2009, 1:26 pm
Th3 Ston3 Cutt3r wrote:Where does one get the cars that you can use for Amigo?


there are in the amigo( arhive v8.4.2.81333 (Mar 12 2009))

you can get it`s here http://www.easy-share.com/1905548970/car.zip
folder "car" put into content
Jun 5th, 2009, 1:26 pm
Jun 5th, 2009, 3:20 pm
Anyone have Lang_Swedish.gro? Can't find it anywhere
Jun 5th, 2009, 3:20 pm