Medion GoPal 5.0 AE 83573_- TMC_PRO Multilanguage

Oct 6th, 2009, 2:44 pm
#455646 by Marko99
@ dalanik,
have youe read the Post from 2much?
to start GoPal - use \navigation/menu/shell.exe ore use mortscript below postet from waklek75

Pozdrav
Marko
Oct 6th, 2009, 2:44 pm
Oct 6th, 2009, 3:36 pm
#455666 by perre
no one helped me with the sound, but ja descubri a process easier to start with the sound to work, but thanks anyway
Oct 6th, 2009, 3:36 pm
Oct 6th, 2009, 4:19 pm
#455689 by dalanik
Marko99: ofcourse, I tried both.... Pozzzz :-)
Oct 6th, 2009, 4:19 pm
Oct 6th, 2009, 6:45 pm
#455769 by mortyDK
I finally got it installed, but I also have no voices :( The "Spoken language" button is greyed out
Oct 6th, 2009, 6:45 pm
Oct 6th, 2009, 10:39 pm
#455907 by quek
Hi 2much
How come the GPS setting button is not shown up ...it is totally grey out?

Thks
Oct 6th, 2009, 10:39 pm
Oct 7th, 2009, 1:03 pm
#456206 by walek75
@quek: for setting GPS you must edit stretdirector_hmi.reg file
(this file you find out on flash\Settings\Navigation\, where flash are name of you flash drive for example ResidentFlash, My Fladh Disk, NandFlash, etc.).
You need to modify:
"2132607121"="4800"
"2132017153"="com2"
first line contains boud rate, second GPS port name.
Oct 7th, 2009, 1:03 pm
Oct 8th, 2009, 10:03 pm
#456956 by quek
walek75 wrote:@quek: for setting GPS you must edit stretdirector_hmi.reg file
(this file you find out on flash\Settings\Navigation\, where flash are name of you flash drive for example ResidentFlash, My Fladh Disk, NandFlash, etc.).
You need to modify:
"2132607121"="4800"
"2132017153"="com2"
first line contains boud rate, second GPS port name.


Thanks Walek75 for the effort
But is still not working..may be is my GPS but I will try again
Oct 8th, 2009, 10:03 pm
Oct 17th, 2009, 8:41 pm
#460649 by Muff Potter 24
The 1st time I udate from 4.7 to 5.0 I havent got Sound.
Since I did a <Clean Install> as I described in Post 5 it works


The Thing I´m missing now is a keygen for Poiwarner for Gopal 5
Oct 17th, 2009, 8:41 pm
Oct 24th, 2009, 11:52 am
#464124 by Twingo
Nice release, 20 WRZ$ Reward. Category: Other navigation softw.
Oct 24th, 2009, 11:52 am
Oct 26th, 2009, 5:00 pm
#465105 by Imi156
Wayteq X820 after power than no GPS signal.
What could be the solution?
Oct 26th, 2009, 5:00 pm
Oct 26th, 2009, 9:54 pm
#465202 by genius1968
Hi !, Sorry for my bad english......It always say that the map has been removed from the SD Card, I don´t know what can i do. Any sugestions..??
Thanks a lot.
Oct 26th, 2009, 9:54 pm
Dec 7th, 2009, 11:06 pm
#485560 by Muff Potter 24
@Genius1968

Do you have the Maps in the MapRegions Folder ?

@Imi156

You have to set the Com-Port and baudrate as Shown in Post 21.

Maybe your Port and Rate can be different from Post 21
Dec 7th, 2009, 11:06 pm
Dec 9th, 2009, 1:58 pm
#486359 by Mio 720
Patched StreetDirectorApp.dll for v77918

EDIT:
I found it by using Google ;-)
All in all many thanks for reading -(“and response to”)- my request :D
Dec 9th, 2009, 1:58 pm
Jan 11th, 2010, 4:10 am
#504388 by nunor2009
walek75 wrote:Patched StreetDirectorApp.dll here http://rapidshare.com/files/287916234/S ... torApp.zip. After replace StreetDirectorApp.dll to patched one, Go Pal 5 should work on devices other than Medion.
BTW: On my NDrive G800S i had to modify file settings.dll, to prevent screen blanking, and other strange thinks related to Power Management.


I have the same problem in my Ndrive G280. After running Gopal the screen is always turning white...
Can you post the modification you did in settings.dll to prevent this ?
Jan 11th, 2010, 4:10 am