- Posts 341
- WRZ$
3312.10
@quek: for setting GPS you must edit stretdirector_hmi.reg file
(this file you find out on flash\Settings\Navigation\, where flash are name of you flash drive for example ResidentFlash, My Fladh Disk, NandFlash, etc.).
You need to modify:
"2132607121"="4800"
"2132017153"="com2"
first line contains boud rate, second GPS port name.
(this file you find out on flash\Settings\Navigation\, where flash are name of you flash drive for example ResidentFlash, My Fladh Disk, NandFlash, etc.).
You need to modify:
"2132607121"="4800"
"2132017153"="com2"
first line contains boud rate, second GPS port name.
- Posts 174
- Location Everywhere and Nowhere
- WRZ$
678.20
- Device SGSII and Wince
- OS iOS6
walek75 wrote:@quek: for setting GPS you must edit stretdirector_hmi.reg file
(this file you find out on flash\Settings\Navigation\, where flash are name of you flash drive for example ResidentFlash, My Fladh Disk, NandFlash, etc.).
You need to modify:
"2132607121"="4800"
"2132017153"="com2"
first line contains boud rate, second GPS port name.
Thanks Walek75 for the effort
But is still not working..may be is my GPS but I will try again
- Posts 66
- WRZ$
77.50
- Device HTC Desire Z
- OS iOS6
Is it possible to get the whole DVD or is there a Thread with those Files fpr Medion PNAs ?
- Posts 41
- WRZ$
53.40
The 1st time I udate from 4.7 to 5.0 I havent got Sound.
Since I did a <Clean Install> as I described in Post 5 it works
The Thing I´m missing now is a keygen for Poiwarner for Gopal 5
Since I did a <Clean Install> as I described in Post 5 it works
The Thing I´m missing now is a keygen for Poiwarner for Gopal 5
- Posts 12
- WRZ$
50.70
Hi !, Sorry for my bad english......It always say that the map has been removed from the SD Card, I don´t know what can i do. Any sugestions..??
Thanks a lot.
Thanks a lot.
- Posts 41
- WRZ$
53.40
@Genius1968
Do you have the Maps in the MapRegions Folder ?
@Imi156
You have to set the Com-Port and baudrate as Shown in Post 21.
Maybe your Port and Rate can be different from Post 21
Do you have the Maps in the MapRegions Folder ?
@Imi156
You have to set the Com-Port and baudrate as Shown in Post 21.
Maybe your Port and Rate can be different from Post 21
walek75 wrote:Patched StreetDirectorApp.dll here http://rapidshare.com/files/287916234/S ... torApp.zip. After replace StreetDirectorApp.dll to patched one, Go Pal 5 should work on devices other than Medion.
BTW: On my NDrive G800S i had to modify file settings.dll, to prevent screen blanking, and other strange thinks related to Power Management.
I have the same problem in my Ndrive G280. After running Gopal the screen is always turning white...
Can you post the modification you did in settings.dll to prevent this ?