MioMap PNA C220 patching / unlock

Average rating: 8.44 :: Minimum rating: 1.00 :: Maximum rating: 10.00 :: Number of ratings: 9

Bizio · **Posted:** Mon Mar 10, 2008 2:55 pm

create one folder in SD
MioMap

and inside this other call
maps

MioMap/maps

put here your maps ...

gr_panos · **Posts:** 1 **WRZ$:** 50.10

how i can install the destinator 6 or 7 to a mio c220 with miopap 3.3 ..i have already patch it with the files u give but i cant make cab files of destinator instal.. i try write the destinator folder to storege card and run the destinator from there but...nothing..heeelp

Dredd · **Posted:** Sat Mar 15, 2008 12:25 am

gr_panos wrote:

how i can install the destinator 6 or 7 to a mio c220 with miopap 3.3 ..i have already patch it with the files u give but i cant make cab files of destinator instal.. i try write the destinator folder to storege card and run the destinator from there but...nothing..heeelp

Copy this version of Destinator, which is for PNA, to your memory card and start destinator manually. Hopefully will work...

http://rapidshare.com/files/99606088/DestinatorApps_7_PNA.rar.html

aggelospesma · **Posts:** 2 **WRZ$:** 50.20

thanks

kent032 · **Posts:** 3 **WRZ$:** 50.30

heeeelp!! I overwrite original licence.db on my mio c250,and now i have fruierror{</layer>expected}).Can anybody upload original licence.db or where can I find original dvd for c250.
kent032@gmail.com

Smotan · **Posts:** 8 **WRZ$:** 52.70

I have a MIO C220, but I can´t get it working!
I´ve tried the MIO Transfer Hacked tool, but it doesn´t seem to work on Vista.
Then I tried the storageCard way, and it worked to replace the MioMap.exe for the cracked one.
Then I put all maps on a SD-card, MioMaps/Maps/ but it just won´t work. Someone who knows what to do??

The maps aren´t locked, but when I enter a adress to navigate the navigator can´t find the map. It says it´s unavailable (in swedish).. Anyone??

I also tried the Data.zip, but it didn´t help.. I´m stuck!

Bizio · **Posted:** Mon May 05, 2008 5:34 pm

First:
working drivers C220 in WINVISTA
http://mio.digiwalker.googlepages.com/procedures-howto2

Second:
change the original data.zip,miomap.exe and license.db
for these:
viewtopic.php?f=255&t=35895
and put the maps in...
Storage Card/MioMap/maps

NO in!!
Storage Card/miomaps/map

cosmin800331 · **Posts:** 58 **WRZ$:** 56.40

VOODOOS!L wrote:

Mio PNA C220 patching
Requirements: Mio PNA C220 or C250. Probably working with other version too, but not tested
Overview: All tools you need to get full access to you PNA device and make it possible to install a patched Miomap.exe file so you can use all maps posted in this forum.

More Info: http://forum.ppcwarez.org/search.php?keywords=mio&fid%5B%5D=0&sc=1&sr=topics
Most tools I got from different forums, including this one. So nothing new, but I just wanted to get them all toghether as I spended so much time to get it working myself. With the tools you find here, you get the ones I tested and worked for me. You may backup your files before starting, but all the original files are also available on the CD of your GPS PNA. If your device hangs, you should be able to get it back after a hard reset.

Download Instructions:

Mio storage card patch:

Very easy patch, working for many Mio devices
Download:
Code:
http://uploaded.to/?id=thq1sf
All you need to do is unpack the archive and copy all files to the root of you storage card
When inserting this storage card while your mio is turned on, a popup will appear asking to install the tool, chose yes to patch your mio. All necessary files will be copied to your device, thus once the patch is installed, you don't really need the special files on your storage card anymore.
After restarting (soft reset), a special menu will appear, allowing to get full access to your mio device by using the file explorer.
Using the file explorer, you will be able to copy a patched miomap.exe file over your original miomap.exe

Mio Transfer Hack:

The famous tool to get access to all files on your device. This archive includes the original installation files and the patched miotransfer.exe.
Download:
Code:
http://uploaded.to/?id=o58l5b
Installation:
- unpack 'MioTransferHackedC220.rar'
- install the original miotransfer by running 'setup.exe' from the folder 'MioTransferOrig'.
- copy all files from 'MioTransferHackedC220.rar' into the folder where you installed the original version
- run 'MioTransfer CE5.0 hacked.exe' to get full access to your device. If you are using an other Mio version,
- you could try the hacked 'Mio Transfer CE4.2.exe' to get access to your device.

Patched Miomap 3.3

This is a patched miomap.exe file. It will allow to use any map that you can find in this forum.
Download:
Code:
http://uploaded.to/?id=a7wbws
Overwrite the original miomap.exe file, found in \My Flash Disk\MioMap\MioMap\
To get access to \My Flash Disk\MioMap\MioMap\ you will need the Storage card patch or the MioTransfer Hack.
I had to keep the original licence.db file. It worked in combination with the patched miomap.exe and all maps are recognized and usable
I used this data.zip (found in folder \My Flash Disk\MioMap\MioMap\). So if you get problems, you could try replacing your data.zip with this one.
Code:
http://uploaded.to/?id=q0rdem

Soft reset: push the power on/off button for 5sec. You will get a menu allowing to chose between standby and restart. The restart is a soft reset.
Hard reset: push the power on/off button for at least 10 seconds. Your device will be completely turned off and all settings may be removed. To start the device after a hard reset, push the power on/off button for a least 10 seconds again. After a hard reset, you will have to restart the special patch with the storage card since all original mio files will be restored
The device for which these tools worked for me was a Mio C220 with Rom v5.4, WinCE 5.0.
If you MioMap starts, but with wrong orientation or wrong resoultion, you could try to edit the ini files within the data.zip file or you could try to use my data.zip file:
Code:
http://rapidshare.com/files/87325739/DATA.ZIP.html

Quote:

BTW: Please, let's try to keep this topic clean, post only informative posts or helpfull comments. I just shared my personal experience I had with a friends device, I'm no expert. If I find new information/tools, I'll try to keep this first post up to date. Thank you posts are not necessary, you can just rate the topic on top.

Does it work on MIO C710?

Bizio · **Posted:** Thu May 22, 2008 9:50 pm

hummmm
Mioc220=WinCe 5
Mioc710=WinCE 4.2

no

neutrin · **Posts:** 10 **WRZ$:** 1.10

For me it worked with only the patched Miomap 3.3 (from the link in the first post) and the licence.db file got from somewhere else (the one used for all maps unlocking). It didn't need the data.zip or any other file to be added or replaced.

First I copied also the data.zip file, but it reported an error not finding some file. Then I restored the original data.zip and everything worked perfectly!

All Europe maps (2007.10 and 2008.01) were accepted, no exception.

r_benamin · **Posts:** 26 **WRZ$:** 0.90

@ neutrin

how did you manage the maps 2008.01 to work?

i gor a massage: "some maps are old" or something similar to this!

i read that i nead a patches version of miomap 3.3. (10.Jan.2008) + miomap.exe.id + licence.db

could you please send me your license.db. thx

neutrin · **Posts:** 10 **WRZ$:** 1.10

r_benamin wrote:

@ neutrin

how did you manage the maps 2008.01 to work?

i gor a massage: "some maps are old" or something similar to this!

i read that i nead a patches version of miomap 3.3. (10.Jan.2008) + miomap.exe.id + licence.db

could you please send me your license.db. thx

Don't think I got it so quickly. I experimented about 2 hours with different versions of files, all found on this forum, before I finally got the solution, so please spend your time to dig up everything here then to experiment on the device, before launching the question. See your PM for the links.

tweakradje · **Posted:** Sat Jun 07, 2008 8:55 am

For orientation promlems try sys.txt:

[gx]
gx_orientation=0

with normal data.zip

Cheers

r_benamin · **Posts:** 26 **WRZ$:** 0.90

@ neutrin

thx for the links! but this links i already tried!!!

i thout you got the right files to use igo8 maps with your patched miomap 3.3

thx again!

i am looking now for already 12 hours!

Poonkie · **Posts:** 1 **WRZ$:** 50.10

Hello guys!

This is my first english post,se be patient with me. I've tried to update a c250 to MioMap v3.3 according to the opening post, but without any succes. When I tried to use the patched 3.3 with the original data.zip I had an error, so i tried the other data.zip that you've posted, but once it changed position of the screen, for vertical, and once it sent me a messege about there were maps locked. So I changed it back to MioMap v3.2 that is originaly on it,but I can not update my old maps. Is there any solutions? Thanks for listening,and looking foward to your answers.

Low resolution[Remove message]

MioMap PNA C220 patching / unlock

Low resolution
[Remove message]