iGO R3 2012.08 Israel

Jul 22nd, 2011, 3:33 am
#826121 by if_petra
jampy wrote:
if_petra wrote:
mosheys wrote:ISRAEL 2011.06 for PRIMO
MAP-fbl/POI/Driver Alerts-fda/Truck Restriction-ftr/Speedcam
http://www.multiupload.com/2RY2J8QXMD

hi, where do i put the fda file (on igo 8)?



*.FBL - map files - \Content\MAP
FSP - speed profile for a given road for smart routes (in primo only I think?)
HSP - histspeed (maximum car per given road ratio) - \content\histspeed
FTR - Truck Info - \Content\MAP
FPA - Proximity Alerts - \Content\MAP
FDA - Driver Alerts - \Content\MAP
HNR - Defined Routes - \ Content\ MAP
TMC - Traffic Message Channel - Content\TMC
*.3dc si *.3dl - Content\Building
*.ph - \Content\Phoneme
*.dem - \Contents\dem
*.poi - \Contents\POI
(thx liko)
jampy

thank's, i can't find a good iGO primo 1.2 + Israel content for PNA/PDA that will work on my diamond 2, so i'll have to go on with my old igo 8.i do hope that someone will upload it here soon.
Jul 22nd, 2011, 3:33 am
Jul 22nd, 2011, 7:14 am
#826210 by gadnt
mosheys wrote:ISRAEL 2011.06 for PRIMO
MAP-fbl/POI/Driver Alerts-fda/Truck Restriction-ftr/Speedcam
http://www.multiupload.com/2RY2J8QXMD


the Speedcam file is a TXT file, the old one is SPUD file
is it the same, how to use the TXT file?
Jul 22nd, 2011, 7:14 am
Jul 22nd, 2011, 7:55 am
#826224 by TAL1983
gadnt wrote:
mosheys wrote:ISRAEL 2011.06 for PRIMO
MAP-fbl/POI/Driver Alerts-fda/Truck Restriction-ftr/Speedcam
http://www.multiupload.com/2RY2J8QXMD


the Speedcam file is a TXT file, the old one is SPUD file
is it the same, how to use the TXT file?

Like you used the SPUD- just put him in the folder where the SPUD is
Jul 22nd, 2011, 7:55 am
Jul 22nd, 2011, 9:01 am
#826259 by ardroid
TAL1983 wrote:
gadnt wrote:
mosheys wrote:ISRAEL 2011.06 for PRIMO
MAP-fbl/POI/Driver Alerts-fda/Truck Restriction-ftr/Speedcam
http://www.multiupload.com/2RY2J8QXMD


the Speedcam file is a TXT file, the old one is SPUD file
is it the same, how to use the TXT file?

Like you used the SPUD- just put him in the folder where the SPUD is



I found problems with the text file. For example, on road $5, and road #4, the permitted speed is set to 50kmph.
Very annoying when driving 90, and getting near a camera. I hear constant annoying beeps.

Moving back to my old spud file.
Jul 22nd, 2011, 9:01 am
Jul 24th, 2011, 6:47 am
#827518 by israels
Yes, it is the Driver Alert-fda file
check out this link: http://www.navngo.co.il/page.aspx?page_id=208


Hi all,
Does any one activated the driver alert as shown in Navngo site?(visual & sound),
if so please share how to.it does NOT work for me...
thx.
Jul 24th, 2011, 6:47 am
Jul 24th, 2011, 7:13 pm
#827917 by haimbell
tanks u all can u up this missing files please ? :

HSP - histspeed (maximum car per given road ratio) - \content\histspeed
HNR - Defined Routes - \ Content\ MAP
TMC - Traffic Message Channel - Content\TMC
Jul 24th, 2011, 7:13 pm
Jul 26th, 2011, 8:03 pm
#829358 by kishkush
Can someone please upload the israel raster maps?
Jul 26th, 2011, 8:03 pm
Jul 27th, 2011, 3:50 pm
#830114 by kishkush
Maor wrote:
kishkush wrote:Can someone please upload the israel raster maps?


ISRAEL 2011 RASTER MAPS:
http://www.multiupload.com/T9MESAP540


Thanks Maor,
When I look on the raster files via the "content" option, I keep geting all files in red with a statement: "inactive content"...
Is there a specific license to use these files?
Jul 27th, 2011, 3:50 pm
Jul 27th, 2011, 4:27 pm
#830197 by Maor
kishkush wrote:
Maor wrote:
kishkush wrote:Can someone please upload the israel raster maps?


ISRAEL 2011 RASTER MAPS:
http://www.multiupload.com/T9MESAP540


Thanks Maor,
When I look on the raster files via the "content" option, I keep geting all files in red with a statement: "inactive content"...
Is there a specific license to use these files?


try to edit sys.txt and add:
[lua]
rastermaps=1
Jul 27th, 2011, 4:27 pm
Jul 27th, 2011, 4:55 pm
#830232 by mosheys
Thanks Maor,
When I look on the raster files via the "content" option, I keep geting all files in red with a statement: "inactive content"...
Is there a specific license to use these files?[/quote]

try to edit sys.txt and add:
[lua]
rastermaps=1


Still getting "inactive content"...
Jul 27th, 2011, 4:55 pm
Jul 27th, 2011, 5:35 pm
#830256 by TAL1983
mosheys wrote:Thanks Maor,
When I look on the raster files via the "content" option, I keep geting all files in red with a statement: "inactive content"...
Is there a specific license to use these files?


try to edit sys.txt and add:
[lua]
rastermaps=1


Still getting "inactive content"...[/quote]

What is the "raster" files?
Jul 27th, 2011, 5:35 pm